Industrial Automation & Technical Solutions
Turnkey B2B engineering capabilities designed for high-availability process control, chemical dosing, warehouse logistics, energy optimization, repair service, and non-destructive inspection.
Industrial Automation & SCADA
PLC, SCADA, HMI, VFD, and DCS integration for high-precision continuous manufacturing, bottling, and processing plants.
- PLC Software & Hardware Solutions (Siemens S7-1500, Allen-Bradley ControlLogix, Schneider Modicon, Delta DVP)
- SCADA & HMI Development (WinCC, Ignition, Wonderware, FactoryTalk)
- Distributed Control Systems (DCS) for continuous process industries
Energy & Flow Monitoring Systems (EMS)
Web-based Energy & Flow Monitoring System (EMS) adapted to industrial facilities with automated data logging and ERP (Oracle/SAP/BMS) export.
- Web-Based Energy & Utility Telemetry Portal
- Continuous Sub-Metering & Batch Energy Cost Allocation
- ERP Data Export Integration (Oracle / SAP / BMS)
Solar EPC & Captive Power Generation
Turnkey C&I Solar EPC (100 kWp to 10+ MWp), captive DG/gas engine synchronization, 11kV/132kV substation SCADA, and zero-export controllers.
- Turnkey C&I Solar EPC (100 kWp to 10+ MWp Rooftop & Ground Mount Arrays)
- High-Efficiency Tier-1 N-Type TOPCon & Bifacial PV Module Arrays
- Captive Multi-Genset (Gas/HFO/Diesel) Isochronous Load Sharing & Auto Synchronization
Chemical Dosing & Effluent Treatment (ETP / WWTP)
Precision chemical dosing skids, pH/ORP/DO closed-loop control, biological WWTP aeration, and zero-liquid-discharge ETP automation.
- Automated Chemical Dosing Skids (Coagulant, Flocculant, Acid/Alkali, Antiscalant)
- Turnkey ETP (Effluent Treatment Plant) & WWTP SCADA Automation
- Dissolved Oxygen (DO) Closed-Loop VFD Aeration Blower Regulation
Warehouse Automation, WMS & AS/RS Systems
Automated Storage & Retrieval Systems (AS/RS), intelligent Warehouse Management (WMS), high-speed sortation, and conveyor routing.
- Automated Storage & Retrieval Systems (AS/RS) & High-Bay Pallet Shuttles
- Warehouse Management System (WMS) with Real-Time Bin & Lot Tracking
- Warehouse Control System (WCS) for Conveyor & Diverter Sortation
Smart Factory IIoT & Predictive Asset Health
Continuous vibration telemetry, bearing fault FFT spectral diagnostics, automated CMMS asset work orders, and real-time OEE factory intelligence.
- Wireless Tri-Axial Vibration & Surface Temperature Edge Sensors
- FFT Spectrum, Time Waveform & Bearing Enveloping Analysis (ISO 10816)
- Cloud-Connected CMMS for Automated Preventive & Predictive Work Orders
Boiler Automation & Fuel Management Systems
Turnkey combustion control, 3-element drum feedwater regulation, O2 trim, automatic blowdown, and radar automatic tank gauging (ATG).
- 3-Element Boiler Drum Level & Feedwater VFD Regulation
- Electronic Camless Burner Management & Air-Fuel Ratio Control (BMS)
- Continuous Flue Gas Zirconia O2 & CO Trim for Peak Thermal Efficiency
Building Management Systems (BMS & HVAC)
Centralized chiller plant staging, AHU precision temperature/humidity control, cleanroom differential pressure, and BACnet/Modbus telemetry.
- Central Chiller Plant Sequencing, VFD Pump & Cooling Tower Staging
- Air Handling Unit (AHU) Precision Psychrometric Temperature & Humidity Loop
- Pharmaceutical Cleanroom Differential Room Pressure Cascade Control (cGMP)
AI Computer Vision & Quality Inspection
High-speed AI edge vision for fabric width inspection, packaging flaw identification, barcode OCR, and automated gate ANPR weighbridge logging.
- Continuous Web Width Measurement & Defect Detection (Fabric, Film, Paper)
- High-Speed AI Packaging Inspection (Seal Integrity, Fill Level, Cap Skew)
- Optical Character Recognition (OCR/OCV) for Date, Lot & Barcode Verification
Erection, Commissioning & Calibration
Turnkey field installation, panel mounting, cable tray routing, instrument calibration, and site commissioning across Turkey & Pakistan.
- Turnkey Electrical Panel Erection & Cable Tray Routing
- Field Instrumentation & Sensor Calibration (Pressure, Temp, Flow)
- Loop Testing, Signal Validation & Cold/Hot Commissioning
Servo Motors & Electronics Repairing
Specialized industrial electronics repair, VFD drive component refurbishing, servo motor rewinding, and encoder alignment.
- Servo Motor Rewinding & Absolute Encoder Alignment
- VFD / Inverter Power Module & IGBT Diagnostics
- Industrial PLC I/O Board & Controller Circuit Repair
NDT Inspection & 3D Ultrasonic Tomography
Non-Destructive Testing (NDT), 3D ultrasonic tomograph scanning, FLIR thermography, and structural flaw detection for pressure vessels and hulls.
- Portable 3D Ultrasonic Tomograph Concrete & Steel Scanning
- Ultrasonic Pulse-Echo Flaw Detection for Welds & Castings
- FLIR Radiometric Thermal Imaging for Electrical MDB Panels
Industrial Solar EPC & Energy Intelligence
Slash industrial grid tariffs and captive diesel fuel consumption by up to 70%. We provide complete turnkey solar EPC, NEPRA net metering, and zero-export generator protection for manufacturing facilities across Faisalabad, Lahore, Karachi, and nationwide process sectors.
Turnkey C&I Solar EPC
100 kWp to 10+ MWp rooftop and ground-mounted solar plants with Tier-1 N-Type TOPCon bifacial modules.
Zero-Export DG Synchronization
Millisecond smart inverter throttling protecting synchronized diesel generators from reverse power trips.
NEPRA Net Metering
End-to-end regulatory approvals, bidirectional generation metering, and grid interconnection testing.
Real-Time Cloud Telemetry
Multi-inverter monitoring (Huawei, Sungrow, Growatt) with real-time PR and string-level fault analytics.
Erection, Commissioning & System Integration
Pak Industrials delivers complete end-to-end field execution: from site erection and instrument calibration to PLC loop commissioning and cloud telemetry.
Erection, Panel Fabrication & Cold/Hot Commissioning
Our engineering teams handle full-scale field erection, control panel assembly, cable tray installation, loop signal testing, and site commissioning across Turkey and Pakistan.
Sensors & Field Calibration
HART, Temperature, Vibration & Flow Sensors
Erection & Panel Mounting
Turnkey Wiring, Cable Trays & Switchgear Erection
PLC & Controllers
Siemens S7-1500, Allen-Bradley & Schneider PACs
HMI / SCADA Commissioning
WinCC, Ignition & FactoryTalk Visual Workstations
Cloud Analytics & EMS
Predictive Health Scores & SAP/Oracle Energy Logging
Partner with Pakistan's trusted engineering team for turnkey automation, PLC/SCADA retrofits, custom MCC panels, and precision energy metering across Faisalabad, Lahore, Karachi, and nationwide manufacturing plants.
380+ Plants Optimized · Textile, Cement, FMCG & Dairy Facilities Across Pakistan